Product Description:
The Outdoor Waterproof drone jammer is our company's latest product
designed by R&D department,the drone jammer disables the
targeted drones by remote-control signal and GPS signal, to force
the drone fall or return. Effective interference with UAV's
Remote-Control Signal 2400MHz, GPS signal 1500MHz,Remote-Control
Signal and Image Transmission Signal 5800MHz.
Advantages and Features:
1.Batteries are separate from the main device,easy to be replaced and
maintained.
2.Friendly using, no need professional electronic training or
knowledge;
3.The integrated gun design meets the needs of the police equipment
and has powerful effect;
4.Built-in high-gain directional antennas, long-distance
transmission range, precise controllable range;
5.High-strength mold injection molded housing, dustproof,
water-proof,
anti-corrosion;
6.Over-voltage and over-current protection, heat protection, stable
operation;
7.Safety does not harm the human body;
8.The general design of the system meets military requirements
9.Integrated main equipment, battery,
10.Each band can alone switch on/off.
Applications:
Mainly applied to prisons, airports, scientific research centers,
detention houses,
interrogation rooms, courthouses, labor camp,all kinds of military
important places, etc.
that forbid aerial photography by use of UAVs
Specifications:
We could supply customized service by your detail requirements
about frequencies setting. 4-8
Frequency modules we can mix very flexibly.
| Output Interface | Shield band of frequency (MHz) | Output Power |
| CH1 | 2.4G | 100W |
| CH2 | GPS L1 | 100W |
| CH3 | 5.8G | 100W |
| Power supply: | AC110~220V/DC (option) |
| Total RF Power : | 300W |
| Field strength at -80dBm, Shielding area: | 5000 ~ 10000m @ according to signal density of mobile network. |
| Weight: | 30.0Kg |
| Humidity: | 30%-95% |
| Running Temperature: | -10 to +55 Celsius Degree |
| Packing: | Box |
The principle of measuring speed is the frequency DoppIer effect
generated by radar based on the relative motion between itself and
the target. The target echo frequency received by the radar is
different from the radar emission frequency, the difference between
the two is called Doppler frequency. One of the main information
that can be extracted from the DoppIer frequency is the rate of
change of the distance between the radar and the target. When the
target and the interference clutter exist in the sane spatial
resolution unit of the radar at the same time, the radar uses the
difference in DoppIer frequency between them to detect and track
the target from the interference clutter. The principle of
measuring the azimuth of the target is to use the sharp azimuth
beam of the antenna to measure the elevation beam with a narrow
elevation angle, so that the target height can be caIcuIated
according to the elevation angles and the distance.
The principle of measuring distance is to measure the time
difference between the transmitted pulse and the echo pulse.
Because the electromagnetic wave travels at the speed of light, it
can be converted into the precise distance between the radar and
the target
